Yes, it will! I checked with Curt and their Custom Tail Light Wiring Kit item # C96JR is confirmed to fit all models of the 2021 Jeep Wrangler JL which is where the 4xe hybrid models fall under.
This will give you an easy plug and play installation. I have attached the installation instructions below. view full answer...
Yes, they will both work with your 2020 Jeep Cherokee so long as you do not have the tow package. The Curt dinghy tow harness 58963 and the Curt T-Connector Vehicle Wiring Harness item # C56406 connect in line to your factory wiring harness. As far as having enough room there's plenty you'll just have to push the wires down below the lights.
I have linked an installation video below that'll help you get the 4-Way set up.
Please note that you can not use the 4-way when you're flat towing... view full answer...
Hi Steve,
1. # RED24FR is going to be just the brake controller and would still require a wire harness to connect to the vehicle. The # RED49FR is a custom-fit wire harness designed for your Sequoia that will make for an easy installation.
2. The # RED49FR is going to be the only wire harness you need and would plug directly into a connector hidden behind the kick plate to the left of your e-brake. I've attached a video below where Brad installs the other version of this brake controller... view full answer...
Congrats on the new vehicle! We do have a 2" hitch for your 2024 Subaru Solterra. It is the Draw-Tite item # DT46PR. This hitch is custom fit and bolts to your Kia with included hardware. It has a 2,000 lbs towing capacity and a 300 lbs maximum tongue weight.
I have linked the installation instructions below so you can see how to get it set up.
If you are planning on towing you will also need a wiring harness item # 119250KIT and a ball mount kit item # C45534. view full answer...
You'll need a 12 volt charge, so the Hopkins wiring harness isn't something you want to use with the Brake Buddy Select 3 Portable Flat Tow Brake System # HM39524.
The Hopkins is for lights only and doesn't have a connection for the charge line so you'd need one that does, the Roadmaster # RM-15267. view full answer...
Yes, the Tekonsha Prodigy P2 # 90885 will work with your 2024 Tiffin Allegro Bay 38BB. A brake controller like this will work with any motorhome or vehicle that has a 7-way installed. There is no custom wiring harness available so you will have to splice the wires for installation. view full answer...
For custom fit 5th wheel brackets that fit your 2022 Chevy Silverado 2500 you will need the Curt Custom 5th Wheel Bracket Kit for Chevy/GMC Truck item # C16429. These mount in pre-existing holes in your truck's frame.
The item # C16429 and the Curt Universal Fifth Wheel Base Rails item # C16204 are kitted together as the Curt Custom Fifth Wheel Installation Kit item # C16429-204 if you need the entire set up.
I have linked an installation video below so you can see how to get them set... view full answer...
Hey Jim,
The Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56200 doesn't have an extra connector to run up to the third brake light on your Jeep. You would have to splice in the Pacer 3rd Brake Light Module # PP20-702 to your # HM56200 and splice it into the wiring for the third brake light. This logic module will read the signals coming through and filter them properly for the third brake light to function while the Wrangler is being flat towed. view full answer...
Yes, we do! The best set for your 2024 Chevy Silverado 2500 is the B&W Custom Installation Kit item # BWRVK2505. This set of rails is industry standard which means it will work with most 5th wheel hitches on the market. The brackets are custom fit and install in pre-existing holes in your Silverado's frame.
I have linked an installation video below so you can see how to get them set up.
To make towing with a 5th wheel easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring... view full answer...
Hey Tim, the Reese Quick-Install Custom Outboard Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches # RP56001-53 you mention is actually not going to work with your 2022 Ford F-250.
Instead, you're going to have to use the Demco Premier Series Above-Bed Base Rails and Custom Installation Kit for 5th Wheel Hitches # DM8552031-71 which will work with both your F-250 and your Reese 5th Wheel Trailer Hitch w/ Square Tube Slider # RP30051.
Also, for the wiring harness the Bargman... view full answer...
There is no specific plug under your bumper but we do have a plug and play wiring option for your 2024 Subaru Impreza RS. It looks like the RS is a hatchback so the correct wiring harness is the # 118744. If it was a sedan model you would need the # 118629 instead. Both of these plug into the connection points behind the rear taillights so no splicing is required. Tekonsha recently confirmed these fit the 2024 model so until we update our site you can ignore the warning that says "Not confirmed... view full answer...
The only hitch available for the 2022 Audi Q3 S-Line is the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit item # 391AUDQ319T. It installs behind your rear bumper not beneath your vehicle. This hitch is custom fit and has both a removable 2" receiver for accessories and a removable ball mount for towing.
The best part about the Stealth Hitches item # 391AUDQ319T is that when you are not towing a trailer or hauling an accessory your Audi will look like it came from the factory.... view full answer...
Hopkins does not list the EasyLift Truck Bed Tailgate Lift Assist # 74211 as a fit for the 2000 Toyota Tundra, so this may be why they were not able to confirm it. Technically this item is not custom fitted for any specific vehicle. That said, we have had multiple customers report to us that it does indeed fit the early 2000s Tundra. In fact within the last 2-3 years we have received confirmation that it has worked on a 2000, 2001 and 2002 Tundra, so based on this we can tell you that it... view full answer...
The B&W Turnoverball Underbed Gooseneck Trailer Hitch item # BWGNRK1020 has a 30,000 lbs towing capacity and a 7,500 lbs vertical load limit. This gooseneck hitch is custom fit for the 2024 Chevy Silverado 2500 without the prep package. It includes all hardware necessary to complete installation on your truck.
I have linked an installation video below to help you get it set up.
To make towing with a gooseneck trailer easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring... view full answer...
For your application I recommend installing the Carr Custom-Fit Side Steps # CARR124031 since these are more of a universal installation and can be installed so they are only used at the front doors.
You can try installing the Westin E-Series Round Nerf Bars # 23-1405 for a regular cab, but anytime I've reached out to Westin they are pretty adamant about making sure the correct cab is selected when purchasing so I'm pretty skeptical that this will work for the truck you're working on. view full answer...
Hey Paul, so we don't have an install video yet for the Invisi Brake part # RM-8700 on a Ford Ranger but we did have a customer back and give us some advice on their Ranger install:
2021 Ford Ranger. The installation is not really technically challenging, but there are a lot of steps and you need to twist yourself under the dash for quite a bit of it. The main installation comment I would have is assume you are going to drill a hole in the firewall for the wires/air hose. Using the existing... view full answer...
The distance from the center of the hitch pin hole to the edge of the bumper on the # e83ZR is 4-1/2". If that is too far back for your needs I recommend the Curt Trailer Hitch Receiver # C47HR. The same distance on this Curt hitch is only 2". I also like this hitch because it has a concealed cross tube. This gives it a nice clean look since you don't have the cross tube hanging down at the rear of your vehicle. Both of these will work with the # C45534 you were looking at. If you need... view full answer...
As far as I know the tow package on the 2024 Kia Sorento only has plugs for 4-way wiring, not 7-way. If yours has a 7-way factory port at the rear the only option would be to use an OEM harness from Kia.
The Tekonsha OEM Replacement Vehicle Wiring Harness # TK24FR is the only aftermarket option for a 7-way. The T-One connector will plug into the two factory connectors for the 4-way functionality. The body harness with the 12V power and blue brake output wire run up to the cab/battery... view full answer...
Hey Jimmy! It looks like the Vantage Mobility Northstar Packages don't alter the rear end of the 2015 Honda Odysseys. You will want to confirm this because all of our available hitches are set up for unaltered factory set ups.
If this is the case, I recommend our etrailer Hitch item # e98862. This hitch is custom fit and bolts to your Honda with included hardware. It is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity, and a 350 lbs maximum tongue weight.
I... view full answer...
I do see that Curt has extended the fit for the Curt Trailer Hitch Receiver # C11394 to the current 2024 Mitsubishi Mirage. The only modification required is enlarging the access hole to pass the carriage bolt and square hole spacer into the frame. I have included an installation video near the bottom of the page which shows the hole being enlarged near the 6:30 mark of the video.
I recommend installing the Curt T-Connector Vehicle Wiring Harness # C56223 when you install the receiver.... view full answer...
Go To Results